Yellow Gold Plated Sterling Silver Cubic Zirconia Solitaire Ring

History

In 1937, Cubic Zirconia was first discovered by German mineralogists, M. V. Stackelberg and K. Chudoba. Little did they know, the tiny crystals that they discovered would move on to become a popular synthetic gemstone. It wasn’t until the 1970s that Cubic Zirconia was first used in the jewelry world, when scientists began growing the crystals in the laboratory. In the 1980s, Cubic Zirconia use in jewelry continued to grow and today is it one of the most popular diamond substitutes available on the market.

Composition

Cubic Zirconia is the cubic form of zirconium oxide that is created in a laboratory. Its durable material allows the synthetic stone to be molded into a variety of shapes. The stone offers brilliant shine and flawless clarity. Cubic Zirconia is available in a wide range of colors, including a colorless form that is an economically important competitor to natural diamonds.

Caring For Your Cubic Zirconia Jewelry

Like natural diamonds, Cubic Zirconia needs to be cared for in order to maintain its original brilliance and shine. Clean with warm-to-hot water and a soft brush with a mild soap, then immediately dry with a clean cloth after rinsing. Avoid contact with perfume, body lotion, hairspray or any other chemical that may harm the shine of the stone.

Jewelry Information

Color

Jewelers describe the color of a gemstone in terms of three characteristics: hue, saturation, and tone. A gemstone's basic color is its hue, and those with purer hues (for emeralds, green; for sapphires, blue; and for rubies, red) are generally considered more valuable. Often, however, a hint of another color can be detected. Saturation is a measure of the intensity or purity of a gem's hue and is determined by the degree to which gray or brown hues mute its defining color. Value tends to increase with saturation, so a fully saturated purplish blue sapphire may well be more expensive than a muted pure blue one. The tone of a gemstone, a measurement of its lightness or darkness, is usually given as light, medium-light, medium, medium-dark, or dark.

Clarity

A flawless gemstone is rare and expensive. As with diamonds, most gemstones have inclusions, or tiny mineral flaws, that can be seen under magnification or by the careful eye. Make sure that any inclusions in the stone do not penetrate deeply into the gem, as this may cause it to break or crack. Clarity grades range from VVS (very, very slightly included) to I3, in which inclusions are prominent and severely affect the gemstone's beauty.

Cut

A gemstone's cut refers to its proportions and symmetry. In making a gemstone look appealing--the stone should be symmetrical in all dimensions so that it will appear balanced, and that its facets will reflect light evenly. Color should also be taken into account when cutting for optical efficiency. If a stone's color is highly saturated, a shallow cut will allow it to pass more light, while a deeper cut may increase the vividness of a less saturated gem. There is no generally accepted grading system for gemstone cut.

Color

Jewelers describe the color of a gemstone in terms of three characteristics: hue, saturation, and tone. A gemstone's basic color is its hue, and those with purer hues (for emeralds, green; for sapphires, blue; and for rubies, red) are generally considered more valuable. Often, however, a hint of another color can be detected. Saturation is a measure of the intensity or purity of a gem's hue and is determined by the degree to which gray or brown hues mute its defining color. Value tends to increase with saturation, so a fully saturated purplish blue sapphire may well be more expensive than a muted pure blue one. The tone of a gemstone, a measurement of its lightness or darkness, is usually given as light, medium-light, medium, medium-dark, or dark.

Clarity

A flawless gemstone is rare and expensive. As with diamonds, most gemstones have inclusions, or tiny mineral flaws, that can be seen under magnification or by the careful eye. Make sure that any inclusions in the stone do not penetrate deeply into the gem, as this may cause it to break or crack. Clarity grades range from VVS (very, very slightly included) to I3, in which inclusions are prominent and severely affect the gemstone's beauty.

Cut

A gemstone's cut refers to its proportions and symmetry. In making a gemstone look appealing--the stone should be symmetrical in all dimensions so that it will appear balanced, and that its facets will reflect light evenly. Color should also be taken into account when cutting for optical efficiency. If a stone's color is highly saturated, a shallow cut will allow it to pass more light, while a deeper cut may increase the vividness of a less saturated gem. There is no generally accepted grading system for gemstone cut.